Keywords:Carriage Bolt With Nut

Square Head Bolts

Square Head Bolts

Square Head Bolts Standard : Square Head Bolts Materials : Low Carbon Steel or A307-A or Per your requirement *ASME only defines head dimensions up to 1-1/2". Dimensions for 1-3/4 and 2" are approximate and not covered under the ASME dimensional specifications. Dimensions per ASME B18.2.1 1996 Metric Dimensions Per Drawings or Requirement. ...>>more
Send Inquiry
Round Head Square Neck Carriage Bolts

Round Head Square Neck Carriage Bolts

Carriage bolt,  Round Head Square Neck Bolt Standard: DIN 603 Material: Carbon Steel - SUS316, SUS304, SUS201 and SUS200 Size: Thread: M8-M42. Customs design also welcome, ...>>more
Send Inquiry
Stock Carriage Bolt

Stock Carriage Bolt

Standard: Carriage bolt (DIN603) Size: M8---M42 (DIA. )  Material: Low Carbon SteelFinished: Black , Zinc plated , YZP , HDG Packing: 25Kgs/Carton, 36Cartons/Pallet ...>>more
Send Inquiry
Carriage Bolt With Nut

Carriage Bolt With Nut

Main Product: Carriage Bolts with nut (A round head bolt with a square neck under the head and a unified thread pitch. Designed to keep the bolt from turning when a nut is being tightened. The short neck variety is used in sheet metal where a standard sized neck would create an obstruction.     DIN, ANSI, JIS, BS standard, custom design products, coarse/fine thread are available upon your requirement. ) Size: Diameter: M5 to M20, 1/4" to 3/4" Length: 16 to 200mm, 1/4" to 6" Material: L ...>>more
Send Inquiry
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9