Keywords:Carriage Bolts

Square Head Bolts

Square Head Bolts

Square Head Bolts Standard : Square Head Bolts Materials : Low Carbon Steel or A307-A or Per your requirement *ASME only defines head dimensions up to 1-1/2". Dimensions for 1-3/4 and 2" are approximate and not covered under the ASME dimensional specifications. Dimensions per ASME B18.2.1 1996 Metric Dimensions Per Drawings or Requirement. ...>>more
Send Inquiry
Stock Carriage Bolt

Stock Carriage Bolt

Standard: Carriage bolt (DIN603) Size: M8---M42 (DIA. )  Material: Low Carbon SteelFinished: Black , Zinc plated , YZP , HDG Packing: 25Kgs/Carton, 36Cartons/Pallet ...>>more
Send Inquiry
Carriage Bolt With Nut

Carriage Bolt With Nut

Main Product: Carriage Bolts with nut (A round head bolt with a square neck under the head and a unified thread pitch. Designed to keep the bolt from turning when a nut is being tightened. The short neck variety is used in sheet metal where a standard sized neck would create an obstruction.     DIN, ANSI, JIS, BS standard, custom design products, coarse/fine thread are available upon your requirement. ) Size: Diameter: M5 to M20, 1/4" to 3/4" Length: 16 to 200mm, 1/4" to 6" Material: L ...>>more
Send Inquiry
Carriage Bolt

Carriage Bolt

Carriage Bolt Standard: DIN, ANSI/ASME, BS, GB, JIS, non-standard Material: Carbon steel, stainless steel Grade: From grade 4.8 to 12.9 Dimensions: 8 to 48mm, 3/8 to 2 inches Length: From 10 to 300mm, 3/8 to 10 inches, we also can produce according to your requirements Coating: Plain, black, zinc, HDG, nickel, phosphate black Packing: Small box with plastic bag, 25kg bag or box, bulk in pallet ...>>more
Send Inquiry
Cross Carriage Bolt

Cross Carriage Bolt

Cross Carriage Bolt with 6 to 500mm Length, Made of Stainless Steel and Carbon Steel Materials: Carbon steel: Q915, Q215, Q235, 1008, SWRCH8A, SWRM6, SWROH35K, 35ACR, 40ACR, 45#, 40cr, 10B21, 10B33, 10B38 and B7 Stainless steel: 304M, 304HC, 316, 416 carbon Surface treatments: plain, black, yellow zinc, blue zinc, HDG, nickel, dichromate zinc and mechanical galvanized Grades: 4.8, 6.8, 8.8 and 10.9 Length: 6 to 500mm Size: M6 to M36 Standards: DIN, ASIN, BS, GB, JIS and non-st ...>>more
Send Inquiry
Carriage Bolts

Carriage Bolts

Carriage Bolts, Available in Different Finishing Standard: DIN 603, ANSI and BS Diameter: 5 to 20mm, 1/4 to 3/4 inches Length: 8 to 200mm, 5/16 to 8 inches Thread: MM, UNC, UNF and BSW Grade: 4.8, 5.8, 6.8 and 8.8 Finish: plain, zinc, black, nickel, chrome and H.D.G ...>>more
Send Inquiry
Flat Head Carriage Bolt

Flat Head Carriage Bolt

Standard: DIN 603, ANSI and BS Diameter: 5 to 20mm, 1/4 to 3/4 inches Length: 8 to 200mm, 5/16 to 8 inches Thread: MM, UNC, UNF and BSW Grade: 4.8, 5.8, 6.8 and 8.8 Finish: plain, zinc, black, nickel, chrome and HDG ...>>more
Send Inquiry
Carriage Bolt

Carriage Bolt

Material: bright or galvanized steel DIN 603/605 size: M5 to M30 Length: 10-1200 mm Surface finish: plain, zinc-plated, zinc-yellow, zinc-black, hot dipped galvanized Material: low-carbon steel, middle-carbon steel, stainless steel ...>>more
Send Inquiry
Structural Bolt A325 A490

Structural Bolt A325 A490

Structural Bolt IFI STANDARD - BOLT   STRUCTURAL BOLT ASTM A325 AND A4901) Specification Structural Bolt  2) Meets/Exceeds ASTM A325 / ANSI B18.2.6  3) Products' Range Structural Bolt Hex Head / Heavy Hex Head  4) Dimension Metric / Inch  6) Material Middle Carbon Steel / Alloy Steel  7) Dia Range M12-M36  /  1/2"-1 1/2"  7) Finishing Blacken ...>>more
Send Inquiry
Carriage Bolt

Carriage Bolt

1) Material: stainless steel 2) Standards: DIN, ANSI, JIS, BS3) Can produce according to customers' drawings or samplesBolts(carriage bolts,round head aquare neck bolts,fasteners) ...>>more
Send Inquiry
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9