lotus

/Hex Bolt Nut

About Hex Bolt Nut

This author has not yet filled in any details.
So far Hex Bolt Nut has created 79 blog entries.

High Strength Hexagonal Bolts

Attention Problems in Installation of High Strength Hexagonal Bolts In the installation of high strength hexagonal bolt, we need to pay attention to the following matters to ensure the quality of high strength (including internal and external) hexagonal bolts. 1. Installation and construction of high-strength hexagonal bolt should be avoided in rainy and snowy weather [...]

By |September 24th, 2019|High Strength Bolts, High Strength Structure Bolts|Comments Off on High Strength Hexagonal Bolts

Heat Treated High Strength Fasteners

Heat treated high strength fasteners are conditioned according to technical requirements. Heat treatment quenching and tempering is to improve the comprehensive mechanical properties of fasteners to meet the required tensile strength and yield strength ratio of products. Heat treatment process has a vital impact on the internal quality of high-strength fasteners, especially its internal quality. [...]

By |September 22nd, 2019|Fastener|Comments Off on Heat Treated High Strength Fasteners

High Strength National Standard Bolts

There are five main ways to distinguish high strength national standard bolts from fake bolts: 1. Look at the logo, the packing box of the general bolt has the logo. It is divided into 8.8, 10.9 and 12.9 grades. Generally, there is no grade mark on the hexagonal plane of hexagonal bolts. Generally, high strength [...]

By |September 20th, 2019|High Strength Bolts, High Strength Structure Bolts|Comments Off on High Strength National Standard Bolts

Bolt Heads and Threads

How are the bolt heads and threads processed? The forming of bolt head adopts cold heading plastic processing. Compared with cutting processing, the metal fibers are continuous along the shape of the product without cutting in the middle, which improves the strength of the product, especially the mechanical properties. Cold upsetting process includes cutting and [...]

By |September 18th, 2019|Fastener, Hex Bolts|Comments Off on Bolt Heads and Threads

About Fasteners

Fasteners Classification and Characteristics There are many kinds of fasteners. According to their names, fastener can be divided into seven basic categories: bolts, screws, nuts, rivets, pins, welding nails and washers. Bolts include external hexagonal bolts, flange bolts, double-headed bolts, anchor bolts, U-shaped bolts, live bolts, carriage bolts, etc. Nuts include hexagonal nuts, cap nuts, [...]

By |September 16th, 2019|Fastener|Comments Off on About Fasteners

Heavy External Hexagonal Bolts

Heavy external hexagonal bolts: Standard: A325M. Level: 4.8/5.8/6.8/8.8/10.9/12.9; Grade 2/5/8. Specification: M6-M24; 1/4 inch-1 inch. Length: 10mm-270mm; 1/2inch-10inches. Surface treatment: natural color, blackening, galvanizing, hot galvanizing, dacromet. Packing: 25 kg in bulk and 36 cases in pallets. Or according to customer requirements. Heavy external hexagonal bolts application: It is suitable for fixing heavy loads on [...]

By |September 14th, 2019|Heavy Hex Bolts|Comments Off on Heavy External Hexagonal Bolts

High Strength Galvanized Bolt

High strength galvanized bolt is galvanized, so what are their advantages? Hot dip galvanizing is also used to prevent corrosion on the surface of screw, bolt and nut. High strength galvanized bolt has better corrosion resistance than galvanized screw, but the cost is higher, and high strength structure is not suitable for hot dip galvanizing. [...]

By |September 12th, 2019|High Strength Structure Bolts|Comments Off on High Strength Galvanized Bolt

High Strength Dacromet Bolt

High strength Dacromet bolt is treated by Dacromet, so what are the advantages? 1. Superior corrosion resistance. Unetched galvanized coatings are usually corroded by rainbow colored film with thickness of 1-3 micron for 20 hours in salt spray test. The corrosion resistance of Dacromet treated metal surface is about 10 times higher than that of [...]

By |September 10th, 2019|High Strength Bolts|Comments Off on High Strength Dacromet Bolt

Ultra-long Bolts

Ultra-long bolts are usually constructed by the method of torque-one-axis force. They are divided into two stages: initial and final twisting. Torque coefficient refers to the coefficient between the torque and the axial force of the bolts in the process of tightening. Generally speaking, it has a great relationship with the friction coefficient of the [...]

By |September 8th, 2019|High Strength Structure Bolts|Comments Off on Ultra-long Bolts

Building Steel Structures Bolts

Points for Attention in Connecting of Building Steel Structures Bolts 1 In order to make the connection reliable, the number of permanent bolts should not be less than two for each member on the joint and at the end of the splice joint. However, one end connection can be used for the patches of composite [...]

By |September 6th, 2019|High Strength Structure Bolts|Comments Off on Building Steel Structures Bolts

Bored Bolts

The SB of bored bolts refers to the ultimate tensile strength of bolts, indicating the maximum resistance of bored bolts to failure under tension. Tensile strength is the maximum nominal tensile stress of the specimen before breaking. It is the critical value of metal transition from uniform plastic deformation to locally concentrated plastic deformation, and [...]

By |September 4th, 2019|DoWeDo News|Comments Off on Bored Bolts

High Strength Wind Power Bolt-Nut

High-strength wind power bolt-nut connection has no requirement for bolt fastening axial force, so the bolt fastening construction is based on operator's hand feeling and the shape control of connecting joint. Generally speaking, an operator can tighten the nut with ordinary wrench by his own strength to ensure that the connecting contact surface can be [...]

By |September 2nd, 2019|High Strength Bolts|Comments Off on High Strength Wind Power Bolt-Nut

Material of Locking Nut

Locking nut is a kind of nut widely used in machinery and other industries. Its working principle is self-locking by friction between nut and bolt. But the reliability of this self-locking will be reduced in dynamic load. On some important occasions, we will take some measures to prevent loosening to ensure the reliability of nut [...]

By |August 31st, 2019|Lock Nuts|Comments Off on Material of Locking Nut

Advantages of Anti-loosening Nuts

Anti-loosening nuts are common fastening and anti-loosening nut. In some important occasions, in the operation of mechanical equipment, the nut will loosen because of the long use time. At this time, we will take some anti-loosening measures to ensure the reliability of nut locking, and the anti-loosening nut will come into use. Nowadays, many of [...]

By |August 29th, 2019|Lock Nuts|Comments Off on Advantages of Anti-loosening Nuts

Outer Hexagon Nut

Ordinary outer hexagon nut: widely used, characterized by relatively large tightening force, the disadvantage is that there should be enough operating space in the installation, installation can use flexible wrench, open wrench or glasses wrench, the above wrench requires a lot of operating space. Cylindrical head inner hexagon: is the most widely used in all [...]

By |August 27th, 2019|Hexagon Nut|Comments Off on Outer Hexagon Nut

Hexagonal Nut

Hexagonal nut can be divided into three types according to their nominal thickness: type I, type II and thin type. Nuts above grade 8 can be divided into type I and type II. Type I hexagonal nuts are the most widely used. Type 1 nuts are classified into three levels: A, B and C. Among [...]

By |August 25th, 2019|Hexagon Nut|Comments Off on Hexagonal Nut

Embedded Nuts

Embedded nuts are copper nuts made of various embossed wires. Embedded nuts we come into contact with are processed by precision automatic lathes. The main operation mode of embedded knurled copper nuts is injection moulding and embedding after heating. If the melting point of PA/NYLOY/PET is above 200 C, the temperature of the embedded nut [...]

By |August 23rd, 2019|Lock Nuts|Comments Off on Embedded Nuts

Locking Nuts

The purpose of locking nuts is to lock open wire external joints or other pipe fittings. The working principle of nuts is self-locking by friction between nuts and bolts. But the reliability of this self-locking will be reduced in dynamic load. On some important occasions, we will take some measures to prevent loosening to ensure [...]

By |August 21st, 2019|Lock Nuts|Comments Off on Locking Nuts

Anti-loosening Nut

The anti-loosening nut is composed of two parts, each part has a staggered cam. Because the slope angle of the internal wedge design is larger than the angle of the nut of the bolt, the combination will bite tightly into a whole. When vibration occurs, the uplift part of the DISC-LOCK anti-loosening nut dislocates with [...]

By |August 19th, 2019|Lock Nuts|Comments Off on Anti-loosening Nut

Types of Nuts

There are many types of nuts according to different materials and shapes. Nuts are parts that are closely connected with mechanical equipment. They can be joined together only through internal threads and nuts of the same specifications and bolts. Stainless steel nut Self-locking nuts, anti-loosening nuts, locking nuts, four-claw nuts, screw-in nut insurance nuts, connecting [...]

By |August 17th, 2019|Heavy Hex Nuts, Hexagon Nut, Square Nuts|Comments Off on Types of Nuts