Advantage of High Strength Dacromet Bolt

The advantage of high strength Dacromet bolt is due to the development of Dacromet, which has become a necessary technical requirement in some workplaces. The main reasons are as follows: 1. Electroplating not only pollutes the air, land and water, but also does great harm to operators. The state has repeatedly declared that it is [...]

By |September 8th, 2020|A563, ASTM International Standard, Bolt Types, F568M, Heavy Hex Bolts, Hex Bolts, Hexagon Bolt, High Strength Bolts, Structural Bolts|Comments Off on Advantage of High Strength Dacromet Bolt

Dacromet Bolt Coating Featurers

Dacromet bolt coating- apply coating (colored coating, Dacromet) on the workpiece as required, with appearance of silver, black or color, and salt spray test for more than 240 hours. Dacromet: the appearance of Dacromet coating is uniform silver gray. The coating contains 80% thin zinc sheet and aluminum sheet, and the rest is chromate. It [...]

By |July 18th, 2020|A325, ASTM International Standard, Bolt Types, Countersunk Bolt, F3125, F568M, Hex Bolts, Hexagon Bolt, Socket Head Bolts, Stud Bolt|Comments Off on Dacromet Bolt Coating Featurers
  • ASTM A325

ASTM A325

ASTM A325 is an ASTM International standard for heavy hex structural bolts, titled Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength. It defines mechanical properties for bolts that range from 1⁄2 to 1 1⁄2 inches (13 to 38 mm) in diameter. The equivalent metric standard is ASTM A325M, which is [...]